Activar Easy Entry en Audi A5 II (F5)
Guía de codificación para Activar Easy Entry en Audi A5 II (F5). Compatible con VCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica). La ruta manual mostrada está documentada con VCDS / VAG-COM. Consulta el módulo, el tipo de codificación, el canal o Byte/Bit y los valores necesarios antes de realizar el cambio.
¿Qué hace esta codificación?
to activate the “Easy Entry” function for the driver’s seat. By default, vehicles equipped with the electric steering column option automatically lock the driver’s seat when the vehicle is switched off and the driver’s door is open, to allow easy exit from the vehicle. In addition, when the car is unlocked and the driver’s door opened, the driver’s seat moves back to allow easy entry, and when the car is started, the seat moves forward to its last position. If you have a convenient/advanced key and driver memory seats, when you start the car, the seat moves to the recall memory stored on the key used to unlock the car (linked to button 1 or 2 of the driver seat memory buttons in the door trim). This modification enables this functionality when the electric steering column is not installed.
| Estado | 🟠 Depende de centralita/software |
|---|---|
| Módulo | 09 - Central Electrics |
| Tipo | Long Coding |
| Herramientas compatibles | VCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica) |
| Procedimiento documentado con | VCDS / VAG-COM |
Operaciones técnicas
| Operación | Módulo | Tipo | Canal / Byte-Bit | Original | Valor |
|---|---|---|---|---|---|
| Operación 1 | 09 - Central Electrics | Long Coding | Byte 14 → Bit 2 | Byte 14 : Check Bit 2 “easy_entry_steering_column_via_mmi_configurable,active | |
| Operación 2 | 36 - Seat Memory Driver | Long Coding | Byte 3 → Bit 6 | Byte 03 : Check Bit 6 “Easy_Entry_front,0=not active / 1=active | |
| Operación 3 | 06 - Seat Memory Passenger | Long Coding | Byte 3 → Bit 6 | Byte 03 : Check Bit 6 “Easy_Entry_front,0=not active / 1=active |
Vehículos compatibles
- Audi A5 II (F5) · 2016–2024
Procedimiento manual documentado con VCDS / VAG-COM
- 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
- 2 – Switch on the ignition and run the VCDS program. Line 1:
- 3 – Click on “ Select ”, then click on “ 09 – Central Electrics ”.
- 4 – Click on “ Coding 07 ”.
- 5 – Select Byte 14 : Check Bit 2 “easy_entry_steering_column_via_mmi_configurable,active”. Line 2:
- 3 – Click on “ Select” , then click on “
- 36 – Seat Memory Driver ”.
- 5 – Select Byte 03 : Check Bit 6 “Easy_Entry_front,0=not active / 1=active”. Line 2:
- 3 – Click on “ Select ”, then click on “ 06 – Seat Memory Passenger ”.
- 5 – Select Byte 03 : Check Bit 6 “Easy_Entry_front,0=not active / 1=active”. Restart the MMI! You should see the Easy Entry option under “Vehicle settings / Seats / Driver’s seat”. Make sure this option is checked.
Observaciones
Conservar las condiciones, variantes de hardware/SFD y alternativas descritas en los pasos de la fuente.