Cerrar ventanillas automáticamente cuando llueve en Audi TT III (8S/FV)
Guía de codificación para Cerrar ventanillas automáticamente cuando llueve en Audi TT III (8S/FV). Compatible con VCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica). La ruta manual mostrada está documentada con VCDS / VAG-COM. Consulta el módulo, el tipo de codificación, el canal o Byte/Bit y los valores necesarios antes de realizar el cambio.
¿Qué hace esta codificación?
Automatically closes windows and sunroof when it rains. Watch out! There are 4 lines of coding to do here.
💡
¿Es tu primera codificación? Consulta qué son un Byte, un Bit, Coding y Adaptation y dónde encontrarlos.
Antes de modificar: guarda o fotografía siempre el valor original. Una codificación incorrecta puede provocar fallos y algunas funciones dependen del hardware y versión de centralita.
| Estado | 🟠 Depende de centralita/software |
|---|---|
| Módulo | 09 - Cent. Elect |
| Tipo | Procedure |
| Herramientas compatibles | VCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica) |
| Procedimiento documentado con | VCDS / VAG-COM |
| Security Access | 31347 |
Operaciones técnicas
| Operación | Módulo | Tipo | Canal / Byte-Bit | Original | Valor |
|---|---|---|---|---|---|
| Operación 1 | 09 - Cent. Elect | Adaptation | Access Control 2-Regenschliessen_ein_aus → active | active ” and confirm | |
| Operación 2 | 09 - Cent. Elect | Adaptation | Access Control 2-Regenschliessen_art → Permanent | Permanent ” and confirm | |
| Operación 3 | 09 - Cent. Elect | Adaptation | Access Control 2-Menuesteuerung Regenschliessen → active | active ” and confirm | |
| Operación 4 | 09 - Cent. Elect | Long Coding | | byte “0 ” Then check Bit “1 ”: “Rain Light Function active ” Then Bit “2 ”: “Rain Closing active ” –> If RLFS is inaccessible with VCDS, you must use OBDeleven |
Vehículos compatibles
- Audi TT III (8S/FV) · 2014–2023
Procedimiento manual documentado con VCDS / VAG-COM
- 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
- 2 – Switch on the ignition and run the VCDS program. Line 1:
- 3 – Click on “Select ”, then click on “09 – Cent. Elect. ”.
- 4 – Click on “Security Access – 16 ” then enter the code “31347 ”.
- 5 – Click on “Adaptation – 10 ”.
- 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Access Control 2-Regenschliessen_ein_aus ” Facelift: “ZV KOMFORT – Regenschliessen_ein_aus ”
- 7 – On this same page, there is a second drop-down menu at the bottom of the page. On this menu, select “active ” and confirm. Line 2:
- 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Access Control 2-Regenschliessen_art ” Facelift: “ ZV KOMFORT – Regenschliessen_art ”
- 7 – On this same page, there is a second drop-down menu at the bottom of the page. On this menu, select “Permanent ” and confirm. Line 3:
- 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Access Control 2-Menuesteuerung Regenschliessen ” Facelift: “ ZV KOMFORT – Menuesteuerung Regenschliessen ”.
- 7 – On this same page, there is a second drop-down menu at the bottom of the page. On this menu, select “active ” and confirm. Line 4:
- 5 – Click on “Coding – 07 ”.
- 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “RLFS ”.
- 7 – Select byte “0 ” Then check Bit “1 ”: “Rain Light Function active ” Then Bit “2 ”: “Rain Closing active ” –> If RLFS is inaccessible with VCDS, you must use OBDeleven : This modification is not only possible with VAG-Com for versions lower than 14.6.0 beta, the VCP cable is required for RLFS encoding. If RLFS modification does not work with VAG-Com, use VCP for coding. RLHS sensor not compatible! (after 2015)
Observaciones
Conservar las condiciones, variantes de hardware/SFD y alternativas descritas en los pasos de la fuente.