Activar alarma antirrobo con claxon en Audi Q3 II (F3)

Activar alarma antirrobo con claxon en Audi Q3 II (F3)

to activate an alarm with horn in the event of intrusion into the vehicle, and to lock the vehicle if the door is opened.

Guía de codificación para Activar alarma antirrobo con claxon en Audi Q3 II (F3). Compatible con VCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica). La ruta manual mostrada está documentada con VCDS / VAG-COM. Consulta el módulo, el tipo de codificación, el canal o Byte/Bit y los valores necesarios antes de realizar el cambio.

Antes de modificar: guarda o fotografía siempre el valor original. Una codificación incorrecta puede provocar fallos y algunas funciones dependen del hardware y versión de centralita.
Estado🟠 Depende de centralita/software
Módulo09 - Cent. Elect
TipoAdaptation
Herramientas compatiblesVCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica)
Procedimiento documentado conVCDS / VAG-COM
Security Access31347

Operaciones técnicas

OperaciónMóduloTipoCanal / Byte-BitOriginalValor
Operación 109 - Cent. ElectAdaptationAdditional functions – Signalhorn ohne KL 15 → activeactive ” and confirm
Operación 209 - Cent. ElectAdaptationAnti-theft protection – Akustischer Alarm Signalhorn → activeactive ” and confirm
Operación 309 - Cent. ElectAdaptationAnti-theft protection – Alarmsignal → frequency modulatedfrequency modulated ” and confirm
Operación 409 - Cent. ElectAdaptationAnti-theft protection – DWA Alarmverzoegerung → driver door contact thatchamdriver door contact thatcham ” and confirm
Operación 509 - Cent. ElectAdaptationAnti-theft protection – DWA Camper Modus → activeactive ” and confirm
Operación 609 - Cent. ElectAdaptationProtection antivol – Sirenen Alarmzahl → 10 alarms10 alarms ” and confirm
Operación 709 - Cent. ElectAdaptationProtection antivol – Verzoegerung Panikalarm → 2 sekunden verzoegerung2 sekunden verzoegerung ” and confirm
Operación 809 - Cent. ElectAdaptationAnti-theft Alarm System → activeactive ” and confirm

Vehículos compatibles

Procedimiento manual documentado con VCDS / VAG-COM

  1. 1 – Engine off, ignition off, connect your official VAG-COM VCDS cable to the computer, then plug the other end into your vehicle’s diagnostics socket.
  2. 2 – Switch on the ignition and run the VCDS program. Line 1:
  3. 3 – Click on “Select ”, then click on “09 – Cent. Elect. ”.
  4. 4 – Click on “Security Access – 16 ” then enter the code “31347 ”.
  5. 5 – Click on “Adaptation – 10 ”.
  6. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Additional functions – Signalhorn ohne KL 15 ”.
  7. 7 – On the same page, there’s a second drop-down menu at the bottom of the page. Select “active ” and confirm. Line 2:
  8. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Anti-theft protection – Akustischer Alarm Signalhorn ”.
  9. 7 – On the same page, there’s a second drop-down menu at the bottom of the page. Select “active ” and confirm. Line 3:
  10. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Anti-theft protection – Alarmsignal ”.
  11. 7 – On the same page, you’ll find a second drop-down menu at the bottom of the page. On this menu, select “frequency modulated ” and confirm. Line 4:
  12. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Anti-theft protection – DWA Alarmverzoegerung ”.
  13. 7 – On this same page, there’s a second drop-down menu at the bottom of the page. On this menu, select “driver door contact thatcham ” and confirm. Line 5:
  14. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Anti-theft protection – DWA Camper Modus ”.
  15. 7 – On the same page, there’s a second drop-down menu at the bottom of the page. Select “active ” and confirm. Line 6:
  16. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Protection antivol – Sirenen Alarmzahl ”.
  17. 7 – On the same page, you’ll find a second drop-down menu at the bottom of the page. On this menu, select “10 alarms ” and confirm. Line 7:
  18. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “Protection antivol – Verzoegerung Panikalarm ”.
  19. 7 – On the same page, you’ll find a second drop-down menu at the bottom of the page. Select “2 sekunden verzoegerung ” and confirm. Line 8:
  20. 6 – On this page, at the very top, there is a drop-down menu. In this drop-down menu, choose “ Anti-theft Alarm System ” Anti-theft Alarm System
  21. 7 – On the same page, there’s a second drop-down menu at the bottom of the page. Select “active ” and confirm.

Observaciones

Procedimiento extraído del volcado local completo de VAG-Coding. Conservar las condiciones, variantes de hardware/SFD y alternativas descritas en los pasos de la fuente.

Más codificaciones para Audi Q3 II (F3)