Activar modo Individual de Audi Drive Select en Audi Q5 I (8R)
Guía de codificación para Activar modo Individual de Audi Drive Select en Audi Q5 I (8R). Compatible con VCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica). La ruta manual mostrada está documentada con VCDS / VAG-COM. Consulta el módulo, el tipo de codificación, el canal o Byte/Bit y los valores necesarios antes de realizar el cambio.
¿Qué hace esta codificación?
Activa Audi Drive Select Individual and its management via MMI. On Facelift models, installation of the button on the dashboard is compulsory. Step 1: Button installation and connection to control panel Materials required: Knob Ref: 8K1 959 673 K V10 Repair cable Ref: 000 979 009 E Extraction wrenches, available from VAG Custom – Remove the MMI block using the extraction keys, and replace the old left-hand Start/Stop button with the new one. – Connect the cable (000 979 009 E) to pin 7 of the new ADS button, and the other side of the cable (which will need to be extended) to pin 16 of the grey connector (32 pins) on the control unit. Step 2: Activate ADS in the Power Plant
| Estado | 🟠 Depende de centralita/software |
|---|---|
| Módulo | 09 - Cent. Elect |
| Tipo | Procedure |
| Herramientas compatibles | VCDS / VAG-COM · OBDeleven (cuando la propia ficha lo indica) |
| Procedimiento documentado con | VCDS / VAG-COM |
| Security Access | 20113 |
Operaciones técnicas
| Operación | Módulo | Tipo | Canal / Byte-Bit | Original | Valor |
|---|---|---|---|---|---|
| Operación 1 | 09 - Cent. Elect | Long Coding | | box | |
| Operación 2 | 44 - Power Steering | Long Coding | Byte 3 | Byte 3 : Bit 0: Check «Audi Drive Select (Charisma) active/installed | |
| Operación 3 | 09 - Cent. Elect | Adaptation | car -> carmenuoperation - → charisma-> select → . car -> cardevicelist - → charisma -> check box car - → carbusassignment -> charisma - → Channel 70 | Channel 70 Set value 46 (Comfort + Auto + Dynamic + Efficiency) 2 = Comfort 4 = Auto 8 = Dynamic 16 = Offroad 32 = Efficiency |
Vehículos compatibles
- Audi Q5 I (8R) · 2008–2017
Procedimiento manual documentado con VCDS / VAG-COM
- Con el motor apagado y el contacto quitado, conecta el cable VCDS al ordenador y después conecta el otro extremo a la toma de diagnosis del vehículo.
- Da el contacto y abre VCDS. Bloque 1:
- Pulsa «Select», después pulsa «09 – Cent. Elect.».
- Pulsa «Coding – 07» después pulsa «Long Coding Helper».
- Selecciona el Byte 7: Bit 5: Check «Drive Select installed». Then Byte 8: Bit 0: Check «Enable Engine in ADS Menu» (Active engine/gearbox, for Auto gearbox) Bit 1: (No need to check this bit, replaced by bit 7 of byte 11) Bit 2: Check «Enable Engine in ADS Menu» (for manual gearboxes) Bit 3: Check «Enable Suspension in ADS Menu» (requires controlled damping) Bit 4: Check «Enable Steering in ADS Menu» (for manual gearboxes ) Byte 11: Bit 7: This is a hidden bit, so the value must be changed directly in binary (replace 0 with 1). Then Byte 17: Bit 7: Check box Bloque 2:
- Pulsa «Select» después pulsa «44 – Power Steering».
- Pulsa «Coding – 07» después pulsa «Long Coding Helper».
- Selecciona el Byte 3: Bit 0: Check «Audi Drive Select (Charisma) active/installed». Bloque 3:
- Pulsa «Security Access – 16» e introduce el código «20113».
- Pulsa «Adaptation – 10».
- Select Canal 66 Set value 47 1 = Individual 2 = Comfort 4 = Auto 8 = Dynamic 16 = Offroad 32 = Efficiency 64 = Race Step 3: Activate the MMI menu The hidden menu must be activated (See: Activate hidden menu MMI 3GP ) Launch the Hidden Menu by pressing MENU + CAR (for 6s) car -> carmenuoperation -> charisma-> select “5”. car -> cardevicelist -> charisma -> check box car -> carbusassignment -> charisma -> select [CAN Komfort] 1/9 Reboot the MMI by pressing MENU + Wheel + Top Right Button. Selection of Comfort, Auto, Dynamic, Offroad, Efficiency modes in Individual Mode configuration
- Select Channel 70 Set value 46 (Comfort + Auto + Dynamic + Efficiency) 2 = Comfort 4 = Auto 8 = Dynamic 16 = Offroad 32 = Efficiency
Observaciones
Conservar las condiciones, variantes de hardware/SFD y alternativas descritas en los pasos de la fuente.